New Owner B2650 Backhoe Pin Slipping Out

[BrandonV]

First off, wanted to say Hi. I've been catching up on the forums since buying a B2650 TLB. One thing I've searched for and couldn't find an answer to is this:

I'm having an issue with the Backhoe pin (pictured) staying in place while using the backhoe. Within about 30 minutes of use, that pin keeps working its way out? Any suggestions? Thanks in advance.

 

[afret]

The metal rod that goes through the pin that is on the right side of the pin in your photo holds it in place. There is a hole that you should be able to find that you push that metal rod into after you push the pin in place. You should be able to feel for it with your finger.

I just went and took a photo for you:

 

[BrandonV]

Thanks! I will go look for the underneath it. Thanks!

 

[sagor]

And make sure the pin is in the downwards hole so it does not slip out either. (Do not use the upper hole...)

 

[BrandonV]

Thanks, you guys are awesome. I hadn't noticed the lower hole. Put the rods through it, no more issue. Thanks again!