Mower deck won’t lower

Steven-M-S

New member

Equipment
BX2680
May 24, 2025
2
0
1
H[(tjd.vcaVzms6C+L_8
Hello - new to the forum. I know others have posted problems w lowering their mower deck. In researching this problem so far I’ve seen only responses discussing the hydraulic lock (right of the seat) and speed control for the lift arms (under the seat). In my case, the 3-pt hitch goes up and down just fine. The mower deck is stuck in the full up position and does not budge when I try to raise or lower the attachment. Local dealership is closed for the weekend and I have a lot of cutting to do. This is my first time trying to used the mower since the machine came back from the dealer for a different service. I think, though, that when I started it today, the mower was sunk to the ground and I pulled it up to drive to where I was going to cut. Cannot swear to that though. In any case it sure is in the up position now! I’d be grateful for any leads!
 

JimDeL

Well-known member
Lifetime Member

Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
Aug 31, 2022
350
390
63
Austintown, Ohio
What position is the mower height knob in? If the dealer moved it to 'TOP' that could be your problem.
 
  • Like
Reactions: 1 users

Steven-M-S

New member

Equipment
BX2680
May 24, 2025
2
0
1
H[(tjd.vcaVzms6C+L_8
What position is the mower height knob in? If the dealer moved it to 'TOP' that could be your problem.
Oh! Wow! Thank you! Yes, I keep my deck at 4” so I didn’t notice that it was one notch over at top. EEAnd I did not know the function of the “Top” setting. What is that primarily for? Locking the deck up for transport? Thank you so much. You gave me an instant win in joining the forum.
 

JimDeL

Well-known member
Lifetime Member

Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
Aug 31, 2022
350
390
63
Austintown, Ohio
Oh! Wow! Thank you! Yes, I keep my deck at 4” so I didn’t notice that it was one notch over at top. EEAnd I did not know the function of the “Top” setting. What is that primarily for? Locking the deck up for transport? Thank you so much. You gave me an instant win in joining the forum.
Glad I could help.

'TOP' locks the deck up. It's also useful if you remove the deck and have a BXpanded under-armor plate installed to protect the hydro fan and the fuel filter and lift pump.
 
  • Like
Reactions: 1 users

Bearcatrp

Well-known member

Equipment
BX1880 with loader, mower and 3 point
Mar 28, 2023
811
451
63
Minnesota
If you plan on removing the deck for winter duties, get the bxpander plate to protect the bottom, as mentioned above. Just slips on, raise it up, then lock it in place. Worth every penny.
 
  • Like
Reactions: 1 user