I tested the battery, fuses next to battery and inside cab. Everything checks out but I get nothing when I turn key. Not a single light... I don't no where to go next to trouble shoot problem. Tractor was fine, sat for 6 weeks and now nothing. Again not the battery or fuses...
M6060 electrical problem
- Thread starter Gunman606
- Start date
GBJeffOH
Active member
Equipment
L4060, EA Grapple, 6' LP Brush Hog, 8' snow plow, 6' LP tiller, EA Forks, Spraye
Could be the ignition switch and could be a mouse at work too....
Why I keep a couple barn cats. I may get paw prints on the hoods but I don't have a mouse problem.
Why I keep a couple barn cats. I may get paw prints on the hoods but I don't have a mouse problem.
Welcome to OTT
Have you cleaned/tightened all "4" battery cable ends? Many times I've witnessed bad connection on cable at tractor frame is at fault for no start condition.
Have you cleaned/tightened all "4" battery cable ends? Many times I've witnessed bad connection on cable at tractor frame is at fault for no start condition.
Did you do a load test on the battery if not take the time to try to jump start it with another tractor or vehicle you can read good voltage but not have the current needed to turn the motor over if it jump starts then you need a battery if it don't then you need to dig in deeper. Let us know.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
There is 2 fuse boxes have you checked both?
And like others have said,check both ends of both battery cables.
And like others have said,check both ends of both battery cables.