I have a 2005 M4800 that I recently got from an individual. The rear lift arms will not raise high enough to attach to and lift an implement. It looks like the left lift rod has been replaced and is too long. What length should the lift arm be?
M4800 left lift rod
- Thread starter Jay Chambless
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It looks to be 24" (this is not 100% certain) I don't have one in front of me to measure.
All of the SU model tractors take this rod:
Make sure it's in the right hole there are three choices.
Also you can verify length compared to the right buy setting the right link in the middle of it's movement and measuring that length.
All of the SU model tractors take this rod:
Make sure it's in the right hole there are three choices.
Also you can verify length compared to the right buy setting the right link in the middle of it's movement and measuring that length.