M126X E-ENG error code - Won’t start

[jpeilers]

Parked M126X tractor a few weeks ago after moving hay and now the tractor won’t start. It cranks but won’t fire. The display shows a code (E-ENG) and the Master system warning indicator is flashing as is the Engine warning indicator. I’ll attach a picture of the attempted start up. Any help appreciated.

 

[GreensvilleJay]

Can you 'press any key' to get a PROPER error code ??
Failing that , what's the owner's manual say ??

 

[North Idaho Wolfman]

 

[jpeilers]

View attachment 123421

Thanks for the reply Wolfman. We checked all tge ECU related fuses under the steering column and the ECU related fuse on the positive cable by the battery. We could not locate the ECU relay.

 

[jpeilers]

Can you 'press any key' to get a PROPER error code ??
Failing that , what's the owner's manual say ??

Jay, I did not see a way to “press any key” to get a more specific code. As my brother was removing fuses to check, a specific code would pop up. The only code the tractor is throwing is E-ENG.

 

[North Idaho Wolfman]

Thanks for the reply Wolfman. We checked all tge ECU related fuses under the steering column and the ECU related fuse on the positive cable by the battery. We could not locate the ECU relay.

You're not looking for the the ECU relay.
It's the CRS Relay and CRS fuse that the code suggests that you check.