LX 2610 elec acc on rear of machine

[Klutgring]

Hello everyone,
Was wondering if anyone has added a elec acc on the rear of their LX2610??
I have a 12v seeder broadcaster I use for seeding and fertilizering.
Opinion of it would be best to run a 12 ga. Wire to the batt or is their a wire already in place somewhere??
And it is a cab model. TIA

 

[Showmedata]

on my lx3310 there is an accessory circuit there but I've found it useless. I tried to use it to power my snowblower chute rotator and it continually blew the fuse so I ran a new dedicated circuit. If your seeder needs more than a couple amps I suggest you give it a home run.

 

[Donystoy]

On my cab lx2610 I installed a three way switch on the accessory circuit with one side for my rear camera and the other side for the oil cooler fan when the backhoe is mounted. It has a 15 amp fuse in the circuit. Reason for oil cooler is that I converted my bh77 to self contained hydraulics.

 

[Chad D.]

You’re limited to a 120W load on the OEM circuit back there, so I’d be leery of anything north of 7-8 amps.

If that circuit is like the one on my B2650, it is turned on with the headlight switch, I think. I’d need to dig in to confirm, but I’m pretty sure that’s the way it was. My auxiliary lighting is too much for the OEM circuit, so I just use it to trigger a relay that feeds power from the battery.