Looking for fuel injection pump for Z750 L1500dt........

[Will Nesling]

Hello fellow Kubotans.......well the head gasket c/o went well, but not no much the start up! The coolant had reached the pump and plugged it ,so i took it out and cleaned it.....anyway ,instead of rolling the engine over slowly after installing pump.I cranked engine with starter.... Bang! How ,not sure. I think i rolled crank back a bit,so it slammed into rollers. I have searched the internet for this pump {#15221-51010} and i should be on Global tractors waitlist......i was wondering if any one had any ideas to find a pump or another engine..... The tractor is a "gray market' L1500DT #15392,engine is Z750 #27874.....i also wondered if this pump could be repaired........not sure if it is cast iron or cast steel...i will link picture. Thank you very much for any imput....... Will Nesling Vancouver Island

 

[North Idaho Wolfman]

Hello fellow Kubotans.......well the head gasket c/o went well, but not no much the start up! The coolant had reached the pump and plugged it ,so i took it out and cleaned it.....anyway ,instead of rolling the engine over slowly after installing pump.I cranked engine with starter.... Bang! How ,not sure. I think i rolled crank back a bit,so it slammed into rollers. I have searched the internet for this pump {#15221-51010} and i should be on Global tractors waitlist......i was wondering if any one had any ideas to find a pump or another engine..... The tractor is a "gray market' L1500DT #15392,engine is Z750 #27874.....i also wondered if this pump could be repaired........not sure if it is cast iron or cast steel...i will link picture. Thank you very much for any imput....... Will Nesling Vancouver Island

Send @007kubotaguy a message and see if he can help you out.

FYI you need a injection pump off of a L175, L185, L1500, L1501, and there may be other 2 cylinder models that match too.

 

[Will Nesling]

Send @007kubotaguy a message and see if he can help you out.

FYI you need a injection pump off of a L175, L185, L1500, L1501, and there may be other 2 cylinder models that match too.

thank you for info. .i will contact kubota guy