I have a 2012 L4400 with PTO problems. When I attach an implement to it the PTO will turn until I put any kind of pressure on it. Just like with my tiller, when it is up and clear of the ground, it will turn until it touches the ground,then it will stop. I only have 200 hours on the tractor. Is there a PTO clutch? Does anyone have any suggestions?
L4400 pto
- Thread starter John Terpening
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Yes there is a hydraulic PTO clutch.
Could be that the control for it is bad and it's only releasing the brake and not fully engaging the clutch.
I would get the WSM and start there, it will give you some trouble shooting advice.
Could be that the control for it is bad and it's only releasing the brake and not fully engaging the clutch.
I would get the WSM and start there, it will give you some trouble shooting advice.