l3901

[rufus]

front end loader hydraulic connections

 

[Kennyd4110]

Is there a question about them???

 

[Kennyd4110]

For some reason, @rufus wrote this on my profile (whatever that is) rather than responding to this thread.

FIY: Hit the "REPLY" button to respond.

Hi. I'm new to the tractor game but enjoy hands on. I have a l3901 with a la525 loader. I'm hoping to verify the color coding for the hydraulic connections on the front loader. I replaced the hoses and don't entirely trust my memory. Thanks in advance for any help.

 

[TheOldHokie]

Pictures are worthless if the hoses were replaced. The factory color coding could be totally screwed up.

Hook it all up using current color coding and test boom and bucket operstion. If its wrong its easy to sort out the connections and correct the color coding.

Dan

 

[rufus]

Pictures are worthless if the hoses were replaced. The factory color coding could be totally screwed up.

Hook it all up using current color coding and test boom and bucket operstion. If its wrong its easy to sort out the connections and correct the color coding.

Dan

Where do I find the current color code for the la525? I have the correct colors on the quick connect end based on the rubber caps.

 

[jimh406]

Where do I find the current color code for the la525? I have the correct colors on the quick connect end based on the rubber caps.

A picture could be close. @BorisMA has a very good picture in this thread https://www.orangetractortalks.com/...-changing-hoses-and-getting-rid-of-air.75496/.

I expect it doesn't matter if it is a L2501 or L3901.

 

[TheOldHokie]

Where do I find the current color code for the la525? I have the correct colors on the quick connect end based on the rubber caps.

You can download the Operator and WSM from Kubotabooks.com.

Are you asking about which color goes to which pipe on the loader frame?

Dan