l35 suttle and pto sensor swtich

[sylvain]

hello,i have an issue ,my l35 dont start(starter not turning),on the electrical path we have 2 sensors pto and shuttle,i want to know wherr they are located,i want to bypass and test them but no idea whre they are?????
thanks

 

[Nicksacco]

Hi @sylvain
One switch is on the PTO shift and one is on the shuttle shift.
There is a third switch on the brake, but doesn't have anything to do with starting - just lights up the dash light "brake"

The PTO switch can be seen by pulling off the knob and boot and looking toward the front of the machine.
Yeah, it's buried in there and can only be gotten to easily by removing the front console. Yes you can bypass it

Shuttle switch is on the top of the shuttle linkage under the plastic cover. It too can be bypassed.
if that's what you want to do. It is very easy to get to.

Here is the shuttle switch

Here is the PTO Switch location

The Switch itself is a LONG LEAF 2 pole Normally closed OMRON switch

 

[sylvain]

Hi @sylvain
One switch is on the PTO shift and one is on the shuttle shift.
There is a third switch on the brake, but doesn't have anything to do with starting - just lights up the dash light "brake"

The PTO switch can be seen by pulling off the knob and boot and looking toward the front of the machine.
Yeah, it's buried in there and can only be gotten to easily by removing the front console. Yes you can bypass it

Shuttle switch is on the top of the shuttle linkage under the plastic cover. It too can be bypassed.
if that's what you want to do. It is very easy to get to.

Here is the shuttle switch

View attachment 110853


Here is the PTO Switch location

View attachment 110854

thanks a lot

 

[Nicksacco]

You're welcome.
Goodluck and let us know what you find

 

[sylvain]

You're welcome.
Goodluck and let us know what you find

thanks again for your help,i found a broken wire at the connection of the shuttle switch,everything works well now