L2800 Stall at start up

Tarmy

Well-known member
Lifetime Member

Equipment
L2800, BH76A, FEL,box scraper
Nov 17, 2009
589
595
93
Lake Almanor, Ca
I have 435 hours of flawless use over 17 years. Change fluids and service accordingly to manual. This tractor has worked great.

I used it for about 3 hours a day…over the last 4 days. Two of those days I would start it no issues. The other two, I would start it right up and it would stall after about 3 seconds. Turn it off and start it again…starts right back up. Never has done that before. I noticed that both times it did that I could hear a clicking sound from the right side…faint but noticeable. I noticed that during operation that there was a ticking sound that I had never noticed before…nothing too loud or sounding like metal mashing into metal. Otherwise it operates totally normal.

Any ideas…or things I should be checking. Everything on it is basically original (except fluids). Thanks for any thought or tell me if I am over thinking things.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
35,221
10,414
113
Sandpoint, ID
Something is going on with the stop solenoid circuit.
Follow the WSM to test it.