I have an L275 and the hydrolics dont work. We replaced a couple lines and un froze the little dial that adjusts 3 point drop speed. Other than that we dont know what we did to stop the hydro system from working . It worked before but now nothing. The pump IS working but none of the hydrolic functions work now. any advice?? I know it's probably something easy... help
L275 hydrolics wont work.
- Thread starter jfarley
- Start date
Be more specific --- when you say none of the hydraulics work, do you mean just the 3 pt?? Do you have a loader?? Is there anything beyond TPH that doesn't work??
Yes it does have a front loader. and no functions work. Pump is working . No other hydro. functions work. 3 point, loader dont work.
Hello I had the same problem it was the coupler that hook-up the bucket . A stick had hit the coupler and unhook it but it did not come apart so it looked still conected. When this happen the pump was making a load binding noise. Hope this helps i have a L3010
That's exactly what it was! We had disconnected the coupler on the bucket hydro line and didn't get it connected back together propperly.
Now we're working again. Thanks !!!
Now we're working again. Thanks !!!