I have an L1501/L175 tractor, with a corroded front rim, I'm not having any luck finding the four bolt rim available anywhere. Is there a way of changing the hub to a six or eight bolt pattern on this model tractor. The only other option i have is to weld the corroded areas and hope that it will hold,please advise.
Kubota L1501 front rim/wheel
- Thread starter podieroe
- Start date
You might want to move this to the tires/rims section, but you should be able to find a replacement unless it's really strange bolt pattern/size combination.
Usually you measure from center to center on two adjacent bolt holes, this and the number of holes gives you the spacing. You'll also need the diameter of the center hole. That combined with the width of the rim and the diameter should give you to ability to look up whom would have a new one for you.
Can you give us those dimensions?
Usually you measure from center to center on two adjacent bolt holes, this and the number of holes gives you the spacing. You'll also need the diameter of the center hole. That combined with the width of the rim and the diameter should give you to ability to look up whom would have a new one for you.
Can you give us those dimensions?