Hola, quiero instalar los tres brazos en mi Tractor Kubota B6000 pero nunca se le había puesto un cultivador ni ningún accesorio como desbrozadora etc y no tiene nada más que esto que adjunto en la foto. Además de colocar un inversor de giro quiero instalar estos brazos como el tercer punto y los dos inferiores pero no tiene anclaje para poner el eje inferior ni sé cómo va. ¿Que necesito? Estoy un poco perdido.. Gracias
Instalación tres brazos kubota b6000
- Thread starter Jesús
- Start date
Ola Jesus, Bienvenido o OTT
Messick's has a parts diagram and parts list here.
Messick's tiene un diagrama de piezas y una lista de piezas aquí.
Messick's has a parts diagram and parts list here.
Messick's tiene un diagrama de piezas y una lista de piezas aquí.
Kubota B6000 (Hydrostatic Transmission, 4wd) Parts Diagrams
Kubota Parts Catalog Lookup. Buy Kubota Parts Online & Save!
www.messicks.com
Thank you very much, sorry for writing in Spanish, if it bothered anyone I apologize, I was not aware of the language.Ola Jesus, Bienvenido o OTT
Messick's has a parts diagram and parts list here.
Messick's tiene un diagrama de piezas y una lista de piezas aquí.
Kubota B6000 (Hydrostatic Transmission, 4wd) Parts Diagrams
Kubota Parts Catalog Lookup. Buy Kubota Parts Online & Save!www.messicks.com
Hello, I want to install the three arms on my Kubota B6000 tractor, but I've never installed a cultivator or any other attachments like a brush cutter, etc., and it doesn't have anything other than the photo attached. In addition to installing a reverser, I want to install these arms as the third link and the two lower links, but there's no anchor to attach the lower axle, and I don't know how to do it. What do I need? I'm a bit lost. Thanks.
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
You can find the Operators Manual and Workshop Manual for the B6000 at
The diagrams discussing the 3 pt. hitch are terrible, but a little better in the Operators Manual.
The diagrams discussing the 3 pt. hitch are terrible, but a little better in the Operators Manual.
Your tractor did not come with a ROPS (roll over protection system) so you need to be careful.
Going straight up and straight down the slope is the safest way.
If you do not have a front end loader (FEL) then you will need weights for the front to help balance the weight of any attachment on the back. This will keep the front tires from lifting which could cause you to lose the ability to steer. No es bueno!
You could add wheel spacers to the back tires which will widen the stance and help stabilize the tractor. You could also add wheel weights or fill the tires with fluid (not plain water) which will also help. There are many threads on OTT discussing these issues.
Going “straight up”…a slope …can also result in a “back flip” …
BACKING up a steep slope is safer, of course if that accomplishes the task.
BACKING up a steep slope is safer, of course if that accomplishes the task.
The question I'm asking myself is, what slope can it handle? If there are OTT threads that cover this topic, I'd appreciate it if you'd be so kind as to share the link. I'm a little worried; I also don't know what degree of incline my tractor can handle. There are probably people who are much more experienced.