Hydraulic valve.

[DAML]

Hi, I have no knowledge of hydraulics. Could someone please advise me of the exact valve that I need to operate the front loader, bucket and 3 point hitch? I have been looking at different valves but I am unsure of the type I need to buy.

 

[North Idaho Wolfman]

The front loader is operated by a Spool valve
The three point valve is built into the tractor.

Would need a heck of a lot more info to help you more.
Tractor model, loader model are a couple pieces of important information.

 

[DAML]

The front loader is operated by a Spool valve
The three point valve is built into the tractor.

Would need a heck of a lot more info to help you more.
Tractor model, loader model are a couple pieces of important information.

Kubota L3600 and loader model Kubota LA680. What does the oil pipe from the 3 point valve connect to at the other end? Sorry to be so vague.

 

[TheOldHokie]

Kubota L3600 and loader model Kubota LA680. What does the oil pipe from the 3 point valve connect to at the other end? Sorry to be so vague.

Lets leave the 3pt plumbing for another day.

If your tractor is a ROPS model and you want to replace the standard loader valve this should work. You would also need the ppwer beyond sleeve which is sold separately.

Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool (Single Float Spool Optional), 11 GPM

This Monoblock Hydraulic Directional Control Valve uses a Joystick, 2 Spools and has a capacity of 11 GPM. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

summit-hydraulics.com

Power Beyond Adapter Sleeve for P40G Series Summit Monoblock Valves

Power Beyond Adapter Sleeve for P40G Series Summit Monoblock Valves

summit-hydraulics.com

Dan

 

[old and tired]

....I am unsure of the type I need to buy.

Kubota uses "Open Center Valves with Power Beyond" It has to be with Power beyond.

What does the oil pipe from the 3 point valve connect to at the other end?

After the 3 point hitch, the oil just dumps back into the "tank" (the middle section of the tractor).

 

[Russell King]

@DAML

Your descriptions are poor and you may need to post pictures of what you need answers on. The three point valve shouldn’t have any oil pipe leaving it as far as I know (but there could be something I’ve not seen yet)

 

[DAML]

@DAML

Your descriptions are poor and you may need to post pictures of what you need answers on. The three point valve shouldn’t have any oil pipe leaving it as far as I know (but there could be something I’ve not seen yet)

The reason my descriptions are poor is because I know nothing about hydraulics, it's all new to me.

 

[TheOldHokie]

The reason my descriptions are poor is because I know nothing about hydraulics, it's all new to me.

No hydraulic knowledge needed to answer this question. Why do you need a valve for that loader?

Dan

 

[Alfred_2345]

@DAML The guys responding know a lot and are willing to help but you haven't given them much information to go on. You might want to give them a more detailed description of what you are trying to accomplish. As mentioned, pictures help a lot. Also some details on your general knowledge/skills level (i.e. introduce yourself). An answer for a mechanic that just doesn't have experience with hydraulics is different that one for an accountant that has never touched a wrench.

 

[old and tired]

The OP is a New member · From Scotland please keep that in mind with your comments...