Hydraulic control

[Sixmaxwells]

I was just clearing some brush with my l3560 and went to park it and lower my loader and when I pushed my hydraulic lever forward it didn’t have any resistance and just flipped forward and didn’t move the loader. It’s also the same when I pull the lever towards to raise the loader. The lever is working properly when I move it left to right and also the 3rd function is working. Any ideas on what is going on?

 

[i7win7]

a connecting link or cable has come off between valve and control lever.

 

[Sixmaxwells]

a connecting link or cable has come off between valve and control lever.

Thank you. Fixed it. It was just a cotter pin that had broken.