Help with remote hydraulics on L39

[juppgren]

I have an older L39 that I have added the Kubota remote kit (L9553) so that I can run a LandPride stump grinder.
I have a question about the (3) control valves and if there is any difference to them. I have attached pictures and a picture of the label on the remote. Would like some help in diagnosing what the heck the label diagram means. Thanks in advance for any help.

 

[TheOldHokie]

I belueve the label is meant to tell you which direction of the lever movement extends and retracts the cylinders.

Its actually meaningless - the direction is controlled by the order in which you connect the implement hoses. If you dont follow the outlet connection diagram the labels on tje leverd will be backwards.

Dan

 

[fried1765]

I belueve the label is meant to tell you which direction of the lever movement extends and retracts the cylinders.

Its actually meaningless - the direction is controlled by the order in which you connect the implement hoses. If you dont follow the outlet connection diagram the levef labels will be backwards.

Dan

I believe that the most pump flow available on your L39 is 11GPM.
Will that be enough for your stump grinder?

 

[North Idaho Wolfman]

I believe that the most pump flow available on your L39 is 11GPM.
Will that be enough for your stump grinder?

The drive for the stump grinder is the PTO, the hydraulics are just for control of it.