Front Loader Problem

[DS1948]

Anyone know where to obtain a flow/hookup chart or instructions for a front loader. I have a B7300 with an L series loader. Don't know the number. My loader works real slow and no power to lift. The 3-Point works great. I was thinking maybe the lift joy stick is routed wrong or defective.

Any ideas guys?

Dan

 

[Mingy]

Make sure the 3ph is in the down (or at least not up) position.

 

[daniel.ray77]

it might be that the L series loader requires more lifting force than your B series pump can offer. My L225DT has about twice the lifting force as my friends B 7300 even tho his lifts loads twice as fast as mine but only able to lift half the load weight. Just a thought. You might have to swap out your rams to make it function decently

 

[dusty-t]

Tractordata.com says your tractor only puts out 3.9 gal a min. But the L175 only puts out 3.7. Have a look and see if there is a flow control box, valve inline where your loader hooks into the hydraulics. There may be a lever or a nut with a small roll pin sticking out of it. If these are not in the proper position it can cause the problem you describe. I see all kinds of b7300 tractors online with loaders. Good luck and keep us posted. Dusty