Front atachment needed

[kysales]

I would like to attach a small grader blade to the front of my b6000.

I need a hitch type atachment so it will work on the front of my b6000 tractor.

Where can I buy a front type hitch that will allow me to attach a grader blade.

Thanks

otis

 

[Piker]

I bought a used 5' ATV plow blade & built a mount for my B7100 to use the stock mounting system. Raise/lower with a small winch. Used it for plowing snow all winter & worked great. Cut 6" off each end to make it 4' as I kept running into stuff. I replaced the wimpy wear strip with a shortened bucket edge from a big loader. Tried using it to spread gravel yesterday & found the angle too agressive. Worked good for snow but wanted to dig too deep for gravel. Will have to modify & tip it forward some. I have a back blade I built & can adjust with the top link so may not bother.
http://s572.photobucket.com/albums/ss166/Piker_photos/Kubota B7100/B7100 - ATV Snow Plow/

 

[kysales]

Any chance I could get you to build me a rear mount like the one in your photo.

The part that bolts to the rear of the engine mounts only

If so please contact me with price

thanks

otis

 

[Piker]

Kysales - I am just a hobby-welder. To build my mount, I mocked it up out of plywood & scrap wood the same dimension as my steel tubing. When everything looked right I cut my steel, welded it up & painted it. With a copy of the photo from Photo Bucket a local welding shop could whip that up in no time.