Error Code 92, Motor NG

[jerryjharrison]

I have a Kubota L5740 HST, and yesterday, while moving some light brush, the Intellipanel began to display the error code above. The tractor would also not shift into the faster range. I have determined that the error code is related to the Hi-Lo Solenoid, but have been unable to locate it physically on the tractor. I have read that it is located near a filter, but so far, no joy.

Any assistance or clues would be appreciated.

 

[dfh1977]

Did Google search for l5740 error code 92. Found this from our site. http://www.google.com/url?q=http://...4QFjAB&usg=AFQjCNHFjn9DifTIhpbjQvr1RJ8AlusTZQ lists the error 92. Question posted was error 90 but it tells about error 92 as well. You will probably have to change the solenoid out to fix.

 

[jerryjharrison]

OK, found it. Left hand side of the tractor near the hydraulic filter. One single strand wire running into it, and this wire was broken about 8 inches before the connector to the Solenoid. Soldered the wire back together, insulated the connection, and replaced it into the wire conduit, and strapped it all back together.

No more error code.

 

[dfh1977]

Good it was a easy fix