d1105 crankshaft

[doomtremblay]

good day all

i have a d1105....1996....my crankshalf broke ....i want to find a another one...looking at option....new/ used. just want to know if there if the crankshalfs are the same or they are different. through the years......also the serial on my block is. D1105 038674. asian i beleive.....can anyone give me info on the please...

 

[coachgeo]

came across this. Might help

http://products.jacobsen.com/img/manuals/4160162_813_a.pdf?m=1378240922

Does this ( http://www.kubota.com/part/parts.aspx ) work for you there in Canada? If so then you can search the net to find a tractor model with D1105 engine; then plug that tractor model into the site above. With this you can check to see if there are more than one part # for Crankshafts on the D1105.

 

[doomtremblay]

thanks

very helpful

also d1105 with only 2200hrs...what is the likely cause of the brake of the crankshalf?...

 

[North Idaho Wolfman]

If you broke a crankshaft I personally would just replace the entire motor, the chance of it lasting after a rebuild are very, very, low.

The most likely cause of the crank failing is a bad machine job on the mains.

 

[lugbolt]

If you broke a crankshaft I personally would just replace the entire motor, the chance of it lasting after a rebuild are very, very, low.

The most likely cause of the crank failing is a bad machine job on the mains.

That or perhaps at one point one or more cylinders were filled with liquid, engine cranked, and it obviously wouldn't turn. Usually results in bent rods, but sometimes in cracked crankshaft. They'll run a long time on a cracked crank, but not forever.