Coolant choice and cleaning engine

Gaspasser

Well-known member
Lifetime Member

Equipment
L6060, FEL, forks, front snowblower. KX033 mini ex. Dump truck, Husqvarna saws.
Dec 16, 2023
432
691
93
NH
Not a tractor but it's orange. KX 033 mini ex. Changing oil today. Noticed coolant level low. Would any good quality antifreeze that I use in my car/truck be acceptable for mini-ex and/or tractor (L6060)? My diesel truck "requires" a special formulation. Any advantage to buying Kubota brand? I've gone through the manual.
Second, engine compartment dirty. Besides brushing/ vacuuming, is a water hose down acceptable? Forgive the basic questions, but i worked on humans not engines for a living.

I'll accept the flak. Thanks.
 
Last edited:

Runs With Scissors

Well-known member

Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Jan 25, 2023
3,794
5,084
113
Michigan
For general engine cleaning, I ususally make sure to steer clear of the intake(s) and air cleaner(s) and I avoid using “High pressure”. (i.e. higher than “normal hose pressure”)

Using those “off the shelf” engine degreasers and “hose pressure” has always worked out for me…..

(Oh, and I dont do it with the engine running either (y) )


Not sure about the coolant…But, since that is one of those things that I rarely change I think using Kubota brand would be the easiest/best choice (if they make an actual “Kubota” brand?🤷‍♂️)
 
  • Like
Reactions: 1 user

Gaspasser

Well-known member
Lifetime Member

Equipment
L6060, FEL, forks, front snowblower. KX033 mini ex. Dump truck, Husqvarna saws.
Dec 16, 2023
432
691
93
NH
For general engine cleaning, I ususally make sure to steer clear of the intake(s) and air cleaner(s) and I avoid using “High pressure”. (i.e. higher than “normal hose pressure”)

Using those “off the shelf” engine degreasers and “hose pressure” has always worked out for me…..

(Oh, and I dont do it with the engine running either (y) )


Not sure about the coolant…But, since that is one of those things that I rarely change I think using Kubota brand would be the easiest/best choice (if they make an actual “Kubota” brand?🤷‍♂️)
Thanks!
 
  • Like
Reactions: 1 user

Nicksacco

Well-known member

Equipment
Kubota L35 TLB, 2014 RTV-1140CPX
Sep 15, 2021
764
502
93
Bahama, NC
I'd like to add that hot water works well too for stubborn areas.
I added a hot water outlet specifically for this purpose.
Goodluck
 
  • Like
Reactions: 1 user

McMXi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
8,274
11,653
113
Montana
Not a tractor but it's orange. KX 033 mini ex. Changing oil today. Noticed coolant level low. Would any good quality antifreeze that I use in my car/truck be acceptable for mini-ex and/or tractor (L6060)? My diesel truck "requires" a special formulation. Any advantage to buying Kubota brand? I've gone through the manual.
Second, engine compartment dirty. Besides brushing/ vacuuming, is a water hose down acceptable? Forgive the basic questions, but i worked on humans not engines for a living.

I'll accept the flak. Thanks.
My Ford diesels require "special" Ford coolant, and not the same "special" coolant, but for the tractors I use NAPA ELC which is an OAT (organic acid technology) coolant. It's around $10/gallon and I prefer the premixed stuff. It's a light green/yellow color.

04.jpg
 
  • Like
Reactions: 1 user