D
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Everything looks fine
.....
only question I have .....move that spinner to a spoke rather than the rim......
I know it will not match up perfectly on the spoke - but make a little adjustment to make it fit on the spoke. It will be just as effective, but your hand will not get smacked when coming out of a quick turn of the wheel.
I had to do the same thing - doesnt look worth a damn, but I would not go out without a spinner - it is too valuable with and without power steering. Especially on FEL work!
I can turn the non powered steering - B7100 3 times faster with the spinner and on my BX it is easier still than the power steering alone!
.....only question I have .....move that spinner to a spoke rather than the rim......
I know it will not match up perfectly on the spoke - but make a little adjustment to make it fit on the spoke. It will be just as effective, but your hand will not get smacked when coming out of a quick turn of the wheel.
I had to do the same thing - doesnt look worth a damn, but I would not go out without a spinner - it is too valuable with and without power steering. Especially on FEL work!
I can turn the non powered steering - B7100 3 times faster with the spinner and on my BX it is easier still than the power steering alone!
Attachments
Creature Meadow
Well-known member
Lifetime Member
Equipment
2012 L4600, Disk, Brush Hog, GB60 Garden Bedder, GSS72 Grading Scraper
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
One last question (maybe) on the armrests. Does at least the left armrest flip up out of the way for ingress/egress? If not, does it seem to interfere with getting in and out of the seat?