Bx ignition switched power

[Chowman]

Hi All
I have shiny new BX2370-1 that I want wire up with a Curtis switch / fuse panel; to control my heater, wiper, fan etc. Where do I tap in to get power only when the ignition switch is on? I could run a line straight from the battery, but I'd have to be using my battery charger constantly as numb as I am

 

[85Hokie]

Hi All
I have shiny new BX2370-1 that I want wire up with a Curtis switch / fuse panel; to control my heater, wiper, fan etc. Where do I tap in to get power only when the ignition switch is on? I could run a line straight from the battery, but I'd have to be using my battery charger constantly as numb as I am

Place a relay to the switch. The relay is hooked to the battery directly.

https://www.amazon.com/Absolute-RLS...&qid=1473383568&sr=8-4&keywords=12+volt+relay

 

[Chowman]

Thanx 85hokie. I'll check into it