bx 2200 complete fuilds change

[upnorthdad]

Hi all,
new to the group cause I just bought a very used bx2200. It has 3000 hours on it but seems to run real good yet. It was a one owner used for mowing and hobby farm use. My question is since I don't know when different fluids were changed I want to start fresh with everything new. Can you tell me if I missed anything from the list below? I appreciate all the knowledge on this forum I have read so far.
* Mower deck SAE 90
* Engine oil and filter 10w30
* Transmission fluid SUDT
* Front axle SUDT or SAE 80 or 90
* Cooling system 50/50 blend
* Transmission oil filter cartridge (replace)
* air cleaner (replace)
* transmission oil strainer (clean)
* fuel filter (2) (replace)

Have I missed anything for a complete change of fluids and filters
Thanks much Dave

 

[Bmbbm]

Hi all,
new to the group cause I just bought a very used bx2200. It has 3000 hours on it but seems to run real good yet. It was a one owner used for mowing and hobby farm use. My question is since I don't know when different fluids were changed I want to start fresh with everything new. Can you tell me if I missed anything from the list below? I appreciate all the knowledge on this forum I have read so far.
* Mower deck SAE 90
* Engine oil and filter 10w30
* Transmission fluid SUDT
* Front axle SUDT or SAE 80 or 90
* Cooling system 50/50 blend
* Transmission oil filter cartridge (replace)
* air cleaner (replace)
* transmission oil strainer (clean)
* fuel filter (2) (replace)

Have I missed anything for a complete change of fluids and filters
Thanks much Dave

You got it covered. Pull up the little flap in your floormat next to the HST pedal and grease it also. I would get some spray grease spray and shoot all the linkage you can get to also.