Looking for some sort of sealer or finish to apply to bricks that were used as pavers for the purpose of improving the appearance at our church. Looks like someone capped steps with regular bricks when the concrete steps deteriorated. They're laid finish side up (in the position of a wall that fell over).
The mortar occasionally breaks out and has been touched up at least twice before my current attempt leaving three or four different shades of mortar. When it's wet it looks great because the water makes it all look very similar. When it's dry it isn't pretty.
I was wondering if someone here has used a sealant or coating that may have it retain that wet look. If the sealer darkens the bricks and mortar it won't matter. There isn't anything it needs to match nearby. Thank you.
The mortar occasionally breaks out and has been touched up at least twice before my current attempt leaving three or four different shades of mortar. When it's wet it looks great because the water makes it all look very similar. When it's dry it isn't pretty.
I was wondering if someone here has used a sealant or coating that may have it retain that wet look. If the sealer darkens the bricks and mortar it won't matter. There isn't anything it needs to match nearby. Thank you.
