Blade for B4200 : help / suggestions

[fastlaners]

Hi Guys; I have a small B4200; been plowing snow for 20yrs. with it; 42" loader bucket; would there be a way to attach a blade to bucket or remove bucket and attach blade to frame; maybe go slightly wider than 42" ; this may be a better way to plow snow. thanks John

 

[DonDC]

I just posted my setup for a front bracket and push snow blade with a clamp on bucket attachment. The blade is only 42" inches but for $100.00 I thought it would do for now. If the blade wears out I would cut the old blade from the push part and weld on a larger blade may be 54" to 60" to allow for the reduced width when the blade is angled. I hope this is helpful.

 

[Lil Foot]

My 60" Curtis plow attaches to the loader frame by pulling the bucket pins & substituting the plow for the bucket.... maybe this pic will give you some ideas.
(this is not actually a pic of my tractor, but shows my same setup.)