Old Machinist
Well-known member
Equipment
Kubota LX3310 cab, JD 4310, NH 575E cab backhoe, JD F725, Swisher 60", etc.
For most of my batteries I use a true 10W solar panel with no controller and add a 15SQ045 Schottky Diode rated at 15A 45V. I buy the diodes for $7.33 for 25 off eBay. So far I haven't forgot to unplug one before starting but I figure if I did the worst thing that could happen is I blow a 29 cent diode.
Note I have bought some solar panels advertised to be 10 watts that were not a true 10 watt output. ACO Power panels are reasonably priced and are a true 10W output. Just a tad over a 1/2 amp at full sun so no danger of damaging a battery while enough to overcome most parasitic loads and add a little charge back in.
Note I have bought some solar panels advertised to be 10 watts that were not a true 10 watt output. ACO Power panels are reasonably priced and are a true 10W output. Just a tad over a 1/2 amp at full sun so no danger of damaging a battery while enough to overcome most parasitic loads and add a little charge back in.