Hello everyone. Im a newbie here, just wanted to say what a great forum this is. I have scanned through the forums for an answer to my question and found nothing, so here is my question. I have a B8200, when i turn the key to acc. or while the tractor is running, no lights work. Both headlight and panel lights are not working. The tractor starts and runs fine and the glow plugs work but no lights. I have checked the fuses and they are all good. Maybe ignition switch? Any input on this would be greatly appreciated. Thanks
B8200 electrical question
- Thread starter nadmonkey
- Start date
I would check the ground for the head lights. Try using a jumper wire to a better ground. Do you have a multi meter? Check to see if your getting any power to the lights. When I got my B8200 none of the lights were working but the wiring is very straight forward on the B8200. Hope you can trace the problem.
