B26 Opc fuse keep blowing.

6

65specialk

New member

Equipment
B21 BX25D
Aug 9, 2011
49
0
0
Gasburg, Va.
Tractor just quit while digging . Found the 5 amp opc fuse blown. Replaced it and it popped. Does anyone have a schematic they could send me or any advice as what could be wrong? Is this a common problem? :DThanks Dave
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
33,899
9,117
113
Sandpoint, ID
65specialk said:
Tractor just quit while digging . Found the 5 amp opc fuse blown. Replaced it and it popped. Does anyone have a schematic they could send me or any advice as what could be wrong? Is this a common problem? :DThanks Dave
Click to expand...
Semi common on models equipped with them.

The problem is not alway easy to diagnose, aas it could be a bad/faulty safety switch, stop solenoid, or OPC.

Start by getting a 5 amp self resetting circuit breaker (will plug in just link the fuse) makes checking much easier, then start checking wiring and switches for anything unusual, look for rust, wear, breaks.
 
You must log in or register to reply here.

Top Bottom