Adding quick attach system?

Des

New member

Equipment
L3800HST
Feb 22, 2014
6
0
0
KY
I have been using my L3800HST for a few years now and use primarily a Woods RD72 finish mower, Land Pride 60in Box Blade, 60in junker King Kutter rotary cutter, and borrowed rotary tiller. Primarily the finish mower and rotary cutter, with the box blade in non-mowing part of year.

Which quick attach system would work with my mowers, I was thinking I would be best off with a Pat's quick attach but was worried about the added length to the lower arms.

Thanks for feedback.
 

Wbk

New member
Feb 20, 2013
307
0
0
St Adolphe Manitoba Canada
What I would do is measure all the implements to see if the hitch measurements are the same or close to it. I think with all quick hitches they extend the lower arms by approx. 4", if your going to go with a traditional quick hitch have a look at an Agri Ease they have a better design top hook ( in my opinion) making it easier to adjust if your implements are different.
 

Ortimber

New member
Sep 27, 2016
99
1
0
Oregon
I have a Landpride QH15 on my L3901 which is similar to your tractor. It works well, but I did have to make a couple of simple extensions that allow my brush hog top link to connect properly.