Long story short. I was not pumping any fuel in my L4760. Discovered the line from the tank was plugged and blew it out and we're okay for the time being. .......but now what? Seems like cleaning the intake and tank is next but have no idea where to start. Anybody been here before?
Access to fuel intake on my l 4760
- Thread starter ancientpiker
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You'll need to drain all the fuel, remove the crossover pipe then drop the LH tank and remove the pickup to completely clean it.
Second easier option, that might work. drain all the fuel, remove the cross over pipe and then use Electric fuel pump to circulate fuel into the tank via the pick up line.
Use a catch bucket under the cross over pipe.
Second easier option, that might work. drain all the fuel, remove the cross over pipe and then use Electric fuel pump to circulate fuel into the tank via the pick up line.
Use a catch bucket under the cross over pipe.
Thank you Wolfman. Perfect little project for the season. Still dreading it but that could not be more clearly mapped out. I'll let you know how I do. Merry Christmas.