A totally different motorcycle

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,945
8,695
113
Vilonia, Arkansas
Interesting build. A few things I didn't like about it. First is it's wayyyy too longggggg :rolleyes:

The front end doesn't turn left or right. Will make it a bear getting it turned around if in a tight spot. You would need a foot ball field to turn it around as it sits.

Looks like he jacked with the injection pump and has it running too rich.

Liked how he tied everything together to get it to move
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,945
3,224
113
Peoria, AZ
You'd think that all wheel drive would open off-road possibilities , but like you say, waaaay too long. I like the "bomb" air tanks & cooling air scoops, and the "lay-on-the-ground" parking.
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,945
8,695
113
Vilonia, Arkansas
I've ridden an old ancient AWD dirt bike years ago. Chain drive front and rear. You could steer the front end a little to be able to turn a little sharper. Bike would go right over logs, stumps, and brush piles fairly easy :D:D

The one in the video though, is just a chopper and for show. No practical use other then that :rolleyes:

I did like how he made it look like it had the missiles and cannon :D
 

Tooljunkie

Well-known member
Lifetime Member

Equipment
L1501,home built carry all, mini plow blade.
May 13, 2014
4,150
33
48
61
Lac Du Bonnet, Manitoba,Canada
Two wheel drive bike, was a rincon iirc. Would be cool to have one.
My cushman sandtrap rake is a three wheeler with a hydraulic motor on each wheel.
 

coachgeo

Well-known member

Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Nov 16, 2012
2,459
37
48
Southern OH
Two wheel drive bike, was a rincon iirc.....l.
Rokon and they are still manufactured.

This hydro-drive in video here this fellow has been working on for a while. Im hoping like hell to get my diesel project bike further completed this summer. My bud doing most the work has been ill half the year. Just talked to him minutes ago. He shut down his fabrication biz back in Jan. and his health is getting little better and hopes to be working on it again soon.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
34,241
9,429
113
Sandpoint, ID
The front end doesn't turn left or right. Will make it a bear getting it turned around if in a tight spot. You would need a foot ball field to turn it around as it sits.

Looks like he jacked with the injection pump and has it running too rich.

Liked how he tied everything together to get it to move
It does have steering on the front wheel. :p

And yes he's got the fuel all messed up, everyone thinks black from a diesel is good, it's actually just a waste of fuel. :rolleyes:
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,945
8,695
113
Vilonia, Arkansas
It does have steering on the front wheel. :p

And yes he's got the fuel all messed up, everyone thinks black from a diesel is good, it's actually just a waste of fuel. :rolleyes:
I didn't notice the steering :eek: That thing sounds just like my wood splitter :p:p:D
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
15,204
4,368
113
SW Pa
Its a for show bike, while diesel bikes are interesting and I really think may well be the comming thing, this one is like said useless other than for show
 

Newlyme

Active member
Lifetime Member

Equipment
M4900 w/loader, finish mower, tiller, auger, rake. BX24 w/loader, backhoe
May 27, 2015
628
74
28
Nelson Ohio USA
Saw this at the Iron Horse Saloon, (of course), its gotta beat a zero turn for speed and comfort. :D

20180807_140202.jpg