New BX2380 owner here. I'm considering purchasing the FIMCO 40 gallon 3pt hitch sprayer. My thought is that it could be a very cost and space-effective way to not only spray my property, but transport water out to my tree seedlings and to provide a little rear-end ballast when doing loader work.
I realize that ballast can be pretty cheaply fabricated with concrete, but then I'd have a large concrete block that serves no other purpose. I could also purchase some other 3pt implement (rear blade, etc) that would have other purposes, but not sure I'd use it enough to justify the additional cost (up to 2x the sprayer cost).
The sprayer manual says that when filled it will weigh approx 430lb, which seems to be about the correct recommended rear ballast according to the FEL (LA344) manual.
Wondering if anyone has done something like this and what your experience has been (or other opinions).
Thanks.
I realize that ballast can be pretty cheaply fabricated with concrete, but then I'd have a large concrete block that serves no other purpose. I could also purchase some other 3pt implement (rear blade, etc) that would have other purposes, but not sure I'd use it enough to justify the additional cost (up to 2x the sprayer cost).
The sprayer manual says that when filled it will weigh approx 430lb, which seems to be about the correct recommended rear ballast according to the FEL (LA344) manual.
Wondering if anyone has done something like this and what your experience has been (or other opinions).
Thanks.