Fluid leaking inside front wheel L2600DT

Ray in Texas · Aug 1, 2017

Image pretty much tells the story. I know there are several seals in there. I'm just curious if you can tell which seal is leaking by this image. Also wondering level of effort to do this. I've done brakes and bearings on a car many times and I'm thinking this is similar.
Tractor is an L2600DT

1970cs · Aug 1, 2017

Hard to tell from the picture. Usually the cassette seal at the pivot point is more than not the culprit. Could be the axle flange seal to?

Pat

200mph · Aug 1, 2017

If coming from the axle flange, make certain the bearings are in good shape. I've fixed a couple of leaks in this area on other models and in each one found bearing issues.

If you're handy turning a wrench it shouldn't be too hard to fix.

Bulldog · Aug 2, 2017

You need to check to see if the axle is building pressure. My L3000 started leaking and when I removed the plug it looked like it exploded. Fluid went higher than the hood and covered me up. Kubota offers a vent kit that replaces the dip stick, it solved my leak issue.

Ray in Texas · Aug 2, 2017

Thanks all, it looks like when it cools off in south Texas I may be taking the wheel and fixing it.

rentthis · Aug 3, 2017

I have solved that problem by draining the original oil and refilling it with 80/90 weight. Often, the heavier oil won't leak past the seals. I did this when my dealer suggested it. Before you change the oil, be sure to check Bulldogs pressure suggestion. If it leaks after all that, replace the seal. It's not to bad a job.

Bulldog · Aug 3, 2017

Here's the number for the axle vent if you're interested. I believe the axles are the same but the dealer should be able to tell you for sure.

Search

Fluid leaking inside front wheel L2600DT

Ray in Texas

New member

Attachments

1970cs

New member

200mph

Well-known member

Bulldog

Well-known member

Ray in Texas

New member

rentthis

Active member

Bulldog

Well-known member

Attachments