I have an L345DT with the dual-stage dry clutch, and the 540 PTO won't work. I had a post about it before, and everything that I was told leads me to the clutch. I wondered about it when I bought the tractor, as there is a ton of dead space for the drive clutch, and then it engages in the last inch or so of travel. I've adjusted the clutch according to the manual, but it's pretty much the same. What I'm wondering is if there is a manual or procedure out there to do the clutch replacement. I do have a loader and a cab on it, and I know that it's going to be a PITB, but I need to do it, as only the 1000 rpm PTO works (kind of, it never disengages when I press in the clutch), and when I do my tilling this spring, the tiller can't do that speed.
I have shopped around for a clutch, but I haven't found the entire setup, and I'd like to get everything at one place just for simplicity's sake.
Thanks!
I have shopped around for a clutch, but I haven't found the entire setup, and I'd like to get everything at one place just for simplicity's sake.
Thanks!