Search results

Yes, it's electric so I'll probably switch over to something else. Thanks

Oh ya, someday I'll get that from you but I haven't needed it lately. Thanks

Okay, yesterday I rigged up a flushing system after I removed the thermostat and radiator. I pumped CLR into the water pump and ran the outlet back to the bucket. I ran that for about an hour and decided to run the engine with the cleaning solution circulating. After about 5-10 minutes of...

No unusual smoke or bubbles in the rad either. The bypass nipple was clogged up on the water pump but I got that cleaned. I used a piece wire to try and get any crud off of the impeller but I can't tell if I did because you can't see in there. What is a good flush? Is this stuff any good or do...

Oops, I forgot to mention. With the rad cap off, engine very near to overheating, the water at the top of the rad was 105*. I checked it with a Fluke 52 meter. It felt cool at the bottom. If I place my finger near where the temp sensor is on the head I can only hold it there for a few seconds so...

I picked up a non-running Cub Cadet with a D600 in it. This thing has sat many years not running. I pulled it in the shop and found the injector pump had 2 stuck plungers. I got that repaired and bleed the injectors. I also found the bottom radiator hose plugged up solid with crud. I then pulled...

Well, that didn't work. One piece of solder I had was too small and the other was 95/5 I use at work. It was kind of big to use but I did and it sort of crushed it into the shape of the gear and I couldn't use my micrometer on it. I used the original shims (that I mixed up) and placed them so...

Wolfman, thank you. I should have some small solder in my solder iron kit that should do the trick.

Okay guys, I'm getting this thing back together but I have a question. On page S-13 they talk about putting "fuses" in between the gears and then measure the thickness to check the backlash. What are they talking about? TIA, Todd

Thank you very much Countrybumkin. Parts shipped yesterday so I'm waiting on the big brown truck.:)

Hello everyone. I have a RCK60-24B deck with probably around 1000 to 1200 hours of use(tractor has a little over 1300 hours) and it looks like the lower gearbox seal failed while the wife was mowing with it. From what I have searched, that is about how long they last. I'm not sure how long she...

I'm rebuilding my RC60-G20 deck for my G1900 and don't have a manual. I searched for what oil to use on here and found several different answers. Is 80W90 what should be in there? Thanks.

Hello folks. I'm a new happy owner of a 1994 G1900S garden tractor with most of a cat 0 hitch that I have a few issue on. I'm no stranger to orange with a B7500 as my go to tractor, 8 Cub Cadet diesels and 1 Steiner 420 with a D600 in it. The G1900 didn't run when I picked it up from my Cub...

Hey everybody. I'm new here but been a Kubota B7500 owner for 11 years. What an awesome machine it is. I also have a few Cub Cadets with the Kubota D600 and one of them has a radiator in poor condition. I have it at a repair shop but may need to replace it. The Kubota part # is 19488-72060. What...