Search results

Thanks So Much for that answer !!!! Ironic Messicks is where my B2650 tractor is right now, installing the BH77. Found it listed on Tractor House last month, looking for a used compact D with a cab, to replace my aging Ford 1910 4x4 , with just a ROPS. This last blizzard at age 71, did me...

Yea these are all old posts. Research here 3-14-26 shows trying to duplicate a factory rear dual Hyd. outlet with a B2650HSDC Cab is a XXXXX, not being factor installed. Attached excerpt from Cabota's research when he was purchasing new in 2017, shows the complexity, of the two lever valve...

First, I'd like to thank all members for the help replying to this newbee, yet to get delivery on the used B2650HSDC. I found a Post from a NEW owner (name Cabota) back in 2017, with the same machine, and same question, about adding rear Hyd. functions, to a Cab'd B2650. This was when he was...

As they are mounting the BH77 & Subframe to my B2650HSDC, I'm reading they will have to get into the Power Beyond Hyd.. It already has the Front Loader 3rd. Function option. As this has a Cab, I'm thinking while the Hyd. are getting all opened up, why not at least add a rear single HYD. AUX...

I do have a spring loaded Idler yet to mount. I used a 50 amp Quick coupling for the Honda, for the Starter, like used on Snowplow Solenoids. I can 12v. off that foe a 12v. Chute linear actuator motor. Thanks for the RF remote info. Yea, no more wires !!. My Kubota dash has a pocket on top for...

Thanks for the reply. That welded tube to the grab bar, holds the silver rod for Bh77 arm rotational stop while in transit. I'm going to use that welded tube holder for now , as a point to put a tall 3 ft. Pipe in. This so I can have a grab handle to pull myself up onto the BH77. I'm 71, and...

BH77 question...don't have mine yet, but see a pic of a silver rod in a holder / pipe on the left side of the operator joystick console. Top of that rod is a finger hook. Trying to figure out what it's used for.

Oh My My My, a single Augur at that speed !!!!!!!!!!!! Thanks for that share . I believe we still design some incredible great things. We will walk on Mars.

Where did you get your e-chute motor & RF control from ?

That LARUE reminds me of an OSKOSH I saw at MT. HOOD, Or., years ago at the ski lodge. Had 4 augers about 16ft. tall total. The lodge had tunnel to get in, as the snow pack was so high. So beautiful. I'm also into old trains. Steam Locomotive called a "Cab-Forward". Engineers were in front of...

My slightly used B2650 luck has it, comes with the option 3rd front Hyd. control on the loader. I'll use that to control the blower chute rotation, as the Ford blower does have the Hyd. cyl. mounted on the chute originally, I never used. Now I see you can get electrical linear actuator kits for...

You are correct. Bercomac & others. If you have the Hydrostatic flow, then that will cut the cost for the front mount vs. engine powered. As I had 2 new spare 20 HP Honda's ( I bought from New Bedford Welding Supply, with a used Thermal Arc Welder generator as aux. storm power for my shop )...

The Ford does have built in dual shear bolts. There are Electric Clutches I have seen as options, for the new gas powered front mount snow blowers, on the market. One safety I need to do is a remote shut off for that Honda motor, instead of a clutch, when I re-config. for the Kubota. See if I...

There are a few Mfg's out there today that have turn-key front mount gas drive snow blowers for ATV /UTV / Tractors / Skid Steers. Problem I do not like with the front PTO snow blowers, is a PIA to mount.......Need a Warm Dry garage unless you young caveman, not an old fart like me. Limited...

Turnbuckles were to level the blower and provide the anchor point to the loader arms. Never got around to hook up the Ford bucket hyd. to run the chute. Had a blizzard on the way at the time. Blower is 60 in. wide. Used Martin Dual Chain Sprockets on the PTO, and had to custom taper machine and...

Hi Folks ; I just purchased a used B2650HSDC 2019 with 218 hrs.. Will arrive next week. Replacing my old Blue '86 Ford 1910. Got tired of the cold and wet, never got around to make the canopy, and buy a soft cab. Bought a used Ford PTO Snow Blower many years ago. First winter took off the...

Thanks so much for the reply on the height and pic. When mine arrives next week, need to verify it has the oem step. If it is, I'll get that used one on E-Bay, and double up. Asking $60. Pretty dirty, will offer $35. New are $105. Can't wait for an enclosed cab finally. Will see if I can...

Hi folks, just bought a B2650HDC on line to be delivered next week. Not seen it in person. Only 217 hrs. on her. Question is anyone know the distance from the step under the deck to the ground ? Got bad knees , with left one replaced twice. Figure if I need to buy another used step I found on...