Search results

Thanks everyone for your help, this is a great forum. She's back!

There's a little ball bearing where the arrow's pointing, don't let that fall out and hit the ground, you'll never find it.

Remove the post, there's a screw on top and bottom, I broke the screw on the bottom, thank God that's the only screw that broke, I put it back together without that screw on the bottom and it looks like that will suffice, the little post on the opposite side doesn't need to be removed, but the...

You have to remove this plate, unfortunately it looks like they used lock tight on all the screws, it was Hell getting the plate off, had to use vice grips to get that screw out!

Well I figured it out, thanks to Fedup for the pdf, the problem was the forward switch on the shuttle shift, the lever with the little wheel wasn't pushing the button far enough in to engage the switch, using needle nose pliers I bent the lever out a little as you can see in the picture, this...

I checked it, you and another member sen't me the pdf, I can't thank you enough, when I get this figured out the first thing I'm going to do is come on here and tell you all what it was, Rob.

Thank you, I looked at the relays and they have an indicator on the top of the covers showing what their for, in other words one will have an image for lights, heating and air and so forth, nothing for transmission or drive and reverse, these are the relays under the hood over the engine, unless...

Thank you, yes it shows R for reverse, and shows N for neutral and still shows N in forward, that was my thought as well to start with the shuttle switch, I spoke with a mechanic by phone, he said I could switch the forward and reverse solenoid to see if it's a bad solenoid, he couldn't tell me...

My M125X stopped moving forward suddenly without warning, the light on bottom right of dash indicated N for neutral, pulled shuttle lever in neutral then back into forward still nothing, but will go into reverse, I can drive it in reverse, I know it's an electrical issue, hydraulic level good...