Search results

I would say this is definitely not as it came from the factory. That does not mean there is anything wrong, it may be good for thousands of hours. But I would ask the current owner and would need a good answer before I bought it. If the current owner does not know, I would walk.

I ordered on May 4 and nothing yet. Was also told 2 weeks lead time. So at least they are consistently late. I will be patient and wait, after all these are extraordinary times.

I mow with a Kubota F3680 which may not equal a Ventrac but it is still operates well on steep slopes. But I never travel sideways. It's all up and down. And never with a hint of moisture as turf tires slip and slide. Not much help with the original question.

Fwiw...i have watched more than one YT video with flail mowers on the F3680 which is just a higher HP version of the f3060. So it is obvious to me decks other than Kubota will work but I cannot comment on the rpm.

I am also looking to purchase and have not decided completely. My logic so far, the flat bottom (non-clamshell style) will allow me to manually pick up the odd shaped pieces and place them on the flat bottom. If you miss a few pieces with the clam shell, that means another trip to the brush...

Q tip....if you get the quick change bracket, please keep us informed how it works for you. I was considering it but just have not bought it. The need is small for me so hard to justify it. I would probably change buckets more often if I did have it. Glad that ripper is working for you.

I also see the part number is identical. Assuming I will find a cost effective replacement, I will post the details. Thanks again.

Fordtech86...I would kiss you if you were near. Well, maybe a big, I owe you. This tells me what I needed to know. I see you have an L3200, very similar tractor and the 65 kg force is 143 lbs force. That is a hefty amount as expected. There are some great people on this site.

Do you call Royal Purple cheap? If so, tell me where you buy it.

I managed to loose my hood strut after doing some maintenance. I think I threw it out by mistake. Dumb, I know. Pricing a new one, it is $111. So my inner cheapskate says, I can size a new one, buy it for $30 to max $50 and be ahead. I found the strut sizing formula on several sites. I will...

NAPA sells a UDT look alike (not UDT2) that offers a small savings. Are you using the Royal Purple in your engine, HST transmission or both? The pdf file states it can be used either or. If in the HST, is it a UDT2 look alike replacement? I will listen to anecdotes from someone that worked in...

The EA Wicked55 looks just that, wicked. I try hard to justify it but cannot for my needs. I am envious. FWIW, the EA website gives me a blank white page today. Maybe they are closed due to the crazy conditions we are all under today?

I agree 100%. I have a 10" Kubota bucket and the soil needs to be very dry or you are in for a plugging hassel. I rarely use the bucket, an expensive anchor.

Only heads up I will add, be careful as some dealers, and I know of at least one near me, charge more than MSRP. It took me a little while to catch on but the high priced equipment is priced with a heavy discount. Parts is where they are making the money. I can usually add exactly 25% over...

The large hunk of metal you found in your HSt filter says you have a transmission issue and not a clutch or bearing issue. As someone said, the clutch and bearing are dry. The bearing has a special metal that is permanently self lubricated, it does not see any fluid. A hunk of metal from the...

At least this scammer telegraphed his scam by making it obvious. But I think you are correct raising the alert flag because who knows what he may try next. Yes I think our common sense combined with a healthy sense of scepticism goes a long way.

I have the F3680, same machine but little larger motor. A WSM is so helpful. I also have the exploded parts diagrams manual. Very helpful to learn where everything is as well as understand all the parts. A dealer can get this ordered for you. About $30. Not sure, when you say immediately shuts...

I have the exact same equipment and learned much from these answers. I do not have a pin removal issue but like others have said, there seems to be a sweet spot on which the pins will come out. I.e. weight removed from the pin requires finesse to find them. I like the idea of light sanding and...

D2cat...thanks for this post. I think you convinced me and found my grapple to buy. I too had a problem with spending $2 K for a grapple that would not be used enough to justify that kind of money. I have no doubt the EA wicked55 is a Cadillac of grapples but cost cannot be ignored. A $900...

We think alike. Sure a turbo adds much but it is another component to maintain and repair.