Search results

Hogwash. Also, to learn about oil, including rotella you should go to bob is the oil guy instead.

Update, IT WORKED. I misused a long straight edge but a flat bar will work too. I lifted up the back shaft and what I was really lifting was a giant gear, some more wiggling and it slipped into place with an audible and satisfying thunk. See photo red arrow. If it matters, I did have the PTO...

I am running into the same issue with a BX2350 trying to fix a leak because the old permatex sealant is giving out. I believe the lower left gear gets pulled out inadvertently when removing the cover because both bearings normally rest and move on the cover. I found this solution on another...

Hi, been awhile without updates. I condemned the D902 engine, cylinder 3 had some pretty bad gouging and it would not chooch. I found a D722 a few hours away with 500 hours, and after some months its now installed and running great. I would not recommend such an attempt unless you have patience...

Barely anything came out after the first filter, all that came directly out of the tank thankfully. Brand new drain pan. I am replacing the pump anyway out of mistrust.

More progress today, confirmed one of the safety switches is bad, now just a matter of which one. Engine turns over and sounds like it has good compression, used a remote starter switch. My initial guess as to what is really wrong was confirmed as well when I removed the fuel line after the...

The engine is buttoned up last night and with fluids. In the final run I was cobbling a few things together, used a vacuum plug on the radiator drain, and an AC delco hose will be my intake for a short while. It will breathe fresh air until I cobble together a real hose to the filter, or order...

Finally all parts are in to reassemble the BX2350. Replaced the coolant overflow, reinstalled 1 missing valve on the cylinder head. Now going through the meticulous process of cleaning the block bolt threads. I hand screw the tap, turn it a few times with the wrench, back it out, blow shop air...

Quoting myself for traceability, I put Kubota UDT back in Sunday night and Monday noticed a small puddle. I had replaced the drain plug with a new copper crush washer because I noticed a leak before but guessed it was the plug after I had powerwashed the rear. After jacking it up discovered an...

Thank you for the kind words, and you are extremely observant! The hood and front bonnet is worn but functional. The back fender is really beat up and missing both head and tail lights, also missing the air screen for the battery. I think those might be optional or will retrofit something. It...

Hi. New member here. I bought a 2007 BX2350 in Missouri last month, it sadly had what I would call abuse of a bad mechanic. I believe he misdiagnosed a fuel issue and instead removed the head. The owner gave up on the mechanic after he held it for over a year. I have ordered almost all the parts...