Search results

My logger gave me the idea. He got his hydraulic crimp tool off Amazon for about $150.00 and buys his fittinags there too. He maintains a whole fleet of skidders, feller butchers etc.. As an electrician I may be able to buy a set of dies for some of my large 500MCM crimp Tools too?

Hi All, We have a bunch of equipment that uses 1/4” hydraulic hose. we would like to be able to make replacement hoses on-site. Leaving the farm to get a new hose takes too much time..Which crimp on ends do you prefer? Any tips on what to buy for a starter kit of fittings? How about a crimp...

Anyone own Ironcraft stuff?

Hi All, I am looking at a 50” flail mower from Iron Craft. They are an American Company but the import their Flail from Italy. I am well aware Titan Implements (now Iron Craft) is not bottom their trash like Titan Attachments. also aware the crap quality of Titan Attachments forced Titan...

Found the problem! I had removed the PTO safety switch and it tested fine on my bench and it was working fine, so I re-installed it. When I did the top portion became loose from the bottom and became intermittent. I Jumped it out and the tractor starts like new. New PTO neutral Safety switch on...

Thank You!

Yes, Starter is fine and Cranks perfectly When I use my momentary test switch. Battery is on float charge Victron IP65 charger and voltage everywhere is 13.65V. still no start? Nothing I have done sends 12V to the starter solenoid except bypassing the black/white wire. Something is preventing...

Very common and necessary on Yanmar marine engines. Deere uses Yanmar on their smaller stuff. Never seen this issue on a Marinized Kubota. Yes voltage is good everywhere. solenoid excite still gets no signal…

Did all that plus bypassed all those switches, no change. I feel like I am missing a safety switch...

I used the gold standard for testing cranking batteries a Midtronics EXP1000HD. I also have a 500A carbon pile and it passed that too.

Hi All, I have a B2920HST and it wont engage starter solenoid not even a click? Here's What I've done. Test Equipment Fluke 289 & Fluke 376. Tested solenoid excite wire between under panel relay and starter = good continuity Tested both seat Safety switches = good and working fine Tested...