Search results

Thanks; I can hear hydro whistling/hissing out when I'm standing on it and it's falling..

water in it-- change it out and clean the filters

lol that happened to me by accident when i was doing my testing - had hydro shooting 10ft into the trees...

Three Point leak down: Is this the relief for the three point;

Gotcha. So block pressure was 1850- not terrible Fel was 1500 ish.. though that’s prob not an accurate reading. All those parts in the relief valve; are they sleeved? could the spring also be worn out? So just to refresh. The 3pt can’t hold weight. Even my own 180 lbs. with it lifted I can...

The one on the fel valve?

Ok the. Here it is.

My PB has a quick connect. I was able to hook up to there and this is what I got at full rpm’s

Yes I tied that. Got a few more rotations but wouldn’t turn over. Don’t want to damage anything so I’m going easy. Pressure did jump to around 1750 psi. While cranking.

Hooked it up the way you described and the tractor doesn’t want to turn over. - cranks slow and feels to me like it’s deadheading.

Makes sense. I did that and pressure maxed out at 1500 at full rpm

Either this is bad or I didn’t do it right…

Got the gauge. Just want to confirm the P hose. I was thinking the supply line coming off the block would work..

I thought there was a filter behind there. Guess I gotta look harder— Thanks Dan for all your input.

Filter?

Thinking about trying that. Lever is sloppy. Was looking into replacement parts. "P Hose" meaning the supply from the pump?

I don’t have the tools or the experience to do that.

It's been suggested that I have a bad lift piston O ring. Parts 100 and 110. I'm assuming its all under the cylinder cover?

Going back a while for this- But I'm having the same issue- For the bellow pic- Are the highlighted part what I need? TIA