Search results

  1. S

    D722 starting

    One more piece of advice please if anyone can help. I cant see damage to con rods but does anyone gave the correct length I can check them against please.
  2. S

    D722 starting

    Well just rechecked compression and iv lost most of it on cylinders one and two. Its coming to pieces again. I wont be using ether again. Its now come to light that someone has removed the pistons due to rings being stuck in the grooves, cleaned them out and fitted new rings. I must admit when...
  3. S

    D722 starting

    Checked mine and the green light goes off after a few seconds but when cranking theres power to the GPs. Damn thing is nearly starting! The manifolds getting hot but it just wont pick up and go.
  4. S

    D722 starting

    I will recheck compressions again. Wishing I hadnt tried easy start.... thanks guys I will report back. PS glow plugs are new, tested and working but not working during cranking.
  5. S

    D722 starting

    Thankyou. Compression is 385psi nearly equal on all 3. Pump was sent to a recognised Kubota service agent, and injectors are new. Each (new) glow plug is glowing correctly. I did check ring gaps before fitting to pistons. My glow plug light does not light up when cranking. I will look at this...
  6. S

    D722 starting

    Whoops sorry first time here!
  7. S

    D722 starting

    Yes Im heating correctly. No they dont heat when cranking. Iv tried heating two or three times befire cranking. I have also tried wiring direct so they are hot whilst cranking. Its purged at pump and Iv removed air from injector nuts. I removed pump and replaced it after it was reconditioned. It...
  8. S

    D722 starting

    Thanks. Sorry Im more of a Cummins / Perkins / Iveco size person. Never nornally use starting fluid but did just give it a quick try. She just stalled and made no attempt to fire. I did have running but it was cranking for to long and sliw to come to life. Think I will attempt an injection...
  9. S

    D722 starting

    Guys. Im from UK and I have a Jacobsen triple with a 3 cyl d722. Had a cracked cylinder head and no compression. I have cleaned pistons and replaced rings. Fitted a good head. Had pump and injectors tested and reconditioned. Heater plugs working. New starter motor. Good diesel supply. Good...