Search results

I am up for it. I have replaced the air filter. I will check it to be sure. I will check fuses. I had planned to replace the fuel filters anyway. What would you suggest for glow plug and fuel supply troubleshooting? I just downloaded the Work Shop Manual.

Yes. Sorry. It will eventually start. As other posts suggest, I have verified air filters are ok and recently changed them. I’ll confirm good battery connection. It seems to be turning over at same speed as before. I’ll check fuses and glow plug as well as the start sequence with the pause. I...

Sorry to be dense…. Can you explain this? “You glowing the plugs TO START?”

If I keep cranking, it will eventually turn over but it is a rough start. It then will drive and run but if I’m in a tight corner and driving or out it under heavier load it will bog down. That doesn’t sound like fuel supply?

yeah. At first, nothing. It seems like the wire or safety switch. Once I fixed the wire, it seemed to crank wouldn’t catch. I’ll check the fuses. Thanks!!

small solenoid wire.

12.8V I’d have to re-check during cranking but I recall 9-10V I’ll check it at the starter tomorrow and clean posts etc.

Ok. But if the battery why suddenly after the starter wiring being unplugged?

ok….now it will try to turn over but it is very difficult to start. It cranks and cranks. I can eventually get it to turn over but then loses power when I apply heavier load. Why would this starter cable now turn into this issue? I’m charging the battery but it sounds like a fuel filter issue.

Hi. Yesterday, my tractor was running great. When I went to restart it - nothing. It didn’t even try to turn over. I checked another forum thread and they recommended checking cable to the starter then safety switches. It was the starter wire that came loose. I plugged it back in but the...

Nevermind….it was the loose wire in the starter solenoid. Boom fixed. Thanks.

Hi. I’m about to go through the same troubleshooting process but in the woods in a trail. It’s not ideal but short of getting someone to tow me back I’m going to try a field repair. Can someone help guide me to a few things? I can see that the HST pedal might not be engaging with the safety...