Search results

Problem solved. Taking your advice, I checked the grounding path and all was well with a solid 12v reading. I then followed the red terminal down to the starter and all was well there. I kept following the positive lead, checking the junction plug under the dash next, and that was good too...

Thank you very much for all advice so far. I bought a multimeter and am getting a good 12V reading on the battery so all is well there. I will test the ground on the tractor and then keep moving along the circuit as you suggest. I will update my findings in a few hours when I get a chance to...

I removed the ground from the frame and sanded the rust off to ensure contact, so I don't think that's the problem. I don't own a multimeter so unfortunately I don't know the voltage coming from the battery. However, I did use a 50A charger and it reads that the battery is fully charged. With...

The problem is i'm getting no power at all. Nothing will turn on. No head lights and no oil pressure light; the starter won't even click. The battery is fully charged and even with the charger and battery hooked up at the same time, i'm getting no power. I've checked all connections and I...

Here are a few pics of my project. G4200 Lawn Tractor: Engine Block Before/After: I'm not quite finished cleaning it but I have a good start. Finished Head (you can easily see where the massive crack was repaired):

I'm repairing an old G4200 and wanted to document my project here. I found this little tractor sitting in the mud being used as a table top for random junk. So far, I've taken the head off and all attached parts. I've had a few cracks in the head repaired and also had it surfaced. My current...