Search results

thats strange design for a blade i agree, doesnt it have those stoppers at the ends 🤔 well... everybody has its own 😁

quess its just jammed, have to see if i could revive it, at least now its not totally jammed anymore as it was before 😄 everything in this thing seems to be either rusted or rusted solid...

thanks! i could say that im not a fan of drilling 30mm holes on 25mm plate 😁 if i may post these, i also did some polishing for the blade as it seemed to have lived quite rough life.. i got the inspiration from here of your machine which has some nice custom blade 😄 here its upside down and the...

heres coupler attached to boom with new bucket on the front and old orignal one in the background a closeup of the coupler, its crude but works, locking is done by the nut visible in the upper corner, it rotates a bolt that pushes a tongue into the slot jamming the bucket pin in place.. but...

sounds like mine is jammed badly, have you opened the cover to see the control rods operating the valves, does it have any springs in it? or maybe its just the valve body spring.. i dont have any and feels like its missing something or its just full of sh... things. but it works somewhat, except...

tracks seem quite ready ... 🙈 i was wondering, how does the drive speed (overdrive) pedal work on your machine? .. mine is a bit stiff to move down and returns occasionally to middle (normal speed) state when released, beforehand it stayed at the bottom if pressed... but it might have been...

i have the same kind of issue on my machine... i took the bucket off a while ago (did a little bit of electric-stick-metal-gluing to it) and it seems that its mostly the bucket that is worn out, the boom bushing itself seemed to be still in some circular shape.. maybe yours have the same.

i had some old 90s rubber tracks on at first, then i got new ones and the thing became way smoother and easier to drive.. no more lagging or grinding. ..i can only imagine how it is with steel tracks :D

👍 hope they fit.... :D

did some digging... there it is, under the alternator, guess this is the place where they put hydraulic pumps on tractors with this engine, might be even the exact same thing as in those 🤔 this pressure line goes to the right side of the valve block, other two outputs to "splitter" valve in...

theres middle plate so you cannot se the bottom from the fill hole, need to open the bottom to see :( or just pull a plug and see what comes out first... 🤔 nice, quess the different number ebay-pump matches these, dont know whats the difference... at least its somewhat interchangeable.. (the...

yep, or all of them :D i might suspect swing motor also as it seems to be lacking power, i think.. but how to be sure 🤷‍♂️ swing motor at least has a return straight to the tank without filter, quess there is bleed / return hose also from the tracks.. theres something wrong with the pumps or...

probably not much, all this stuff was at the bottom of the tank and oil was clear as water.. only indication was that when i opened the plug there was some schmoo coming out at first... i did a small preparing examination of the machine, opened the hatch behind the seat, and i found the third...

oh, and the tank bottom looked like this.. 🙈 that black stuff is iron, so thats my thinking that maybe pumps are gone....

i went and checked the machine and there is hydraulic lines going where that pump is on the drawing, so there is something.. :D quess these are the ones, single pump is between the seat and engine.. need to take the access hole open to see whats in there, but on ebay i found these never...

this thing of mine has rollers with ridge that rides inside the groove, heres a worst picture i could ever take but if you imagine hard enough you can barely see one roller in the behind there :D

if it helps anything for the track problem, here is a closeup from the tracks showing little bit of the inside of them these are tracks i have mounted currently if its any help according to seller these fit HANIX 150N, HANIX H15.1, HANIX H15B.2, HANIX H15B PLUS.2, HANIX N120.2, HANIX N150.2...

Thank you so much! both arrived, ive been looking for these for a while :) i took the pump out the other day, the type label is in the upper corner towards the front of the machine, its quite well hidden. on the outside it looks very similar to mine, its 12 spline 14mm diameter shaft with...

would you happen to have any info about the hydraulic pumps of these things? what displacement size are they supposed to be? read the manual 🤦 and there it was :D 3 pumper med kapasitet, 2x 15. l./min + 1x21,71./min. says its 3 but ive found only 2.... maybe my model has...

this is about the same, i have new tracks on and at tension its about 112cm ~44 inches. but for the life of me, i could not count the idler teeth, id say its quite similar. theres 2 teeth inside each rubber "slab", so id say its the same, seems that its the same under carriage.. ....yeah, and...