Search results

new pump fixed the problem! ordered 1 for $470 then a buddy found 1 for $195 on amazon. they both look just like the kabota pump minus the part # ! good to have a spare on the shelf.

Has it been a week yet! (It is the pump). Put a valve in line between pump and by hose, closed the valve completely pressure spiked then dropped with out changing the rpm's. Will pull the pump back apart soon. I see pump prices very from $470 to $1250.

thanks wolfman! i made a new thread for my hyd problem. (M6060 low hydraulic pressure). . oldhokie has pointed me in the right direction.

You would think the problem would have been fixed by now!

You will love the m6060 when mowing fields and such(smoother) but not so much when using the loader compared to the mx6000.

I was thanking that very same thing! I finally got a chance to look at the 6060 sunday afternoon. i did have the gauge hooked to the pressure hose coming from the pump. I will rig up a valve this week.

Yep you are right LA1154 and that is an adjustable pressure relief valve. That was one of the first things i checked, even switched with the one on the 3 point. Both where clean and seated. Tried adjusting with no luck. At first I thought I would find some trash stuck in a relief valve from...

Thanks for the info. Yes I have the gauge hooked to the cylinder port. I do have a shop manual with a flow chart that explains the same procedure. You are right I need to separate the pump from the rest of the system. But I really don't think the pump would produce 2700 psi at all if it was...

I have a m6060 with 800hrs, new filters and fluid new loader cables. I first notice the loader seemed a little week at times, then I got a 10' pull type brush hog last spring. The tractor would only lift the brush hog at half throttle or better. Figured it was just heavy In the middle of last...

you must have had a valve in the loader control stuck. i have had that happen a few times with my l3830. it is always the bucket roll valve. i just hold throttle wide open and run loader joy stick in a circle about 5 times, then it works fine.

the bleach thing is called dakin solution from 1916. are you using it straight or diluting . because a little bleach go's a long ways! Dakin's solution is a dilute solution of sodium hypochlorite (0.4% to 0.5%) and other stabilizing ingredients, traditionally used as an antiseptic, e.g. to...

colt any news on the 7060 problem?

hope colt comes back with something good! i have been fighting what sounds like the same problem on my 2015 m6060. first notice loss of pressure at remotes. it would not pick up my 10'' pull behind unless at hi rpm's. i install a foot operated 3rd function and grapple witch worked good until i...

jim did you figure out why your m had low hyd pressure?