Search results

The gas was removed and system flushed, diesel fuel filled. Crank case is at normal level.

The gasoline has been removed Flushed the system and filled with fresh diesel and restarted, and it idled great for a few moments but after i shut it down and restarted it the runaway happend again.

I have a rtv1140cpx that runs awY after starting

Kubota rtv 1140 cpx Engine runs away after startup Have to cut off the air supply for it to shut down. Machine had some gasoline in the system but i flashed it out and restarted it. Ran ik for a few minutes but started to run away again and i niticed it not hitting in one injector now. Injector...

Thanks for being a smartass reminding me of my spelling error,

The guage pegs when the sending unit is disconnected The temps were taken in different areas of the engine. Top t-stat housing 180 Bottom t-stat housing 208 Top center of the rad hose 160 Center of lower hose 68 Front of the cylinder head 199 Back of cylinder head 270 I hope thats alittle more help

The miss is very intermitant. Temp at the top of the thermostat housing 180f. The temp at bottom of the neck is 208f. Top radiator hose 160f Bottom hose 68f Back of cylinder head 270f Front 199f All this after 15minute high idle. Temp guage is pegged.

It does have an intermitant misfire when it warms up.

I have a 2008 kabota diesel rtv1140 that has been running hot so i replaced water pump, thermostat, cooling fan switch, pressure cap, and had the radiator checked to see if it was clogged. I can drive it all day long at part throttle without overheating but durring hard acceleration the temp...