Search results

I am no expert but I can speak to what my experience of about 1200 hours over the last two years on my 2019 M62. If my bucket is left loaded for some time it does not make a clicking sound and it stays where it was left. I have not left it like this for more than a few hours at most while...

Success! While looking at all of the intellipanel "service inspect" functions I must have entered Mode "L" Throttle Sensor Fine-adjustment Mode. @whitetiger provided the workshop manual info pages 9-S24 through 9-S27 which give step by step instructions for the fine HST and Throttle...

FYI: I wrote down all of the intellipanel "service Inspect" functions for my version of the M62. Based on what I have read and some replies here Kubota must change around what each letter represents. This list is for a 2019 M62 - who knows if software or firmware updates are used to change...

I have a service scheduled but the earliest I could get was Feb 23rd - I was hoping to figure it out before then. However, at this point it looks like my tractor will be sitting until then. I'll be taking the advice you all have given and stop tinkering for now. I do have a workshop manual on...

...some more debug info: When I start the engine via the strange combo of: 1) key turned on; 2) press the HST (gas) forward, reverse, letgo; 3) turn over the engine; A few other functions do not work while the engine is on in the mode: 1) the "Auto Throttle Advance" button can not be selected...

Is How do I reach Kubota tech support? Is it via email or online chat or phone?

I found a shop with a copy and ordered it. Thanks for the offer! I heard the M59 and M62 are very similar - its good to know for the future.

Here is the PN for the M62 shop manual. They said some shops may sell their copy for lots of $$$. 9Y111-13680

FYI: I contacted a parts dealer online and they said Kubota does not yet have a Workshop Manual for the M62.

I made some progress on debugging this issue. After I tried the sensor connection I thought about how I turn on in this "test mode" I describe in the original post. To do this I enter the intellipanel "service inspect" function "K" "HST Fine-adjustment Mode" - then press the HST (Gas) pedal...

Good idea - I pulled the sensor plug and tried to start it in the "test mode" that I have used to verify the engine can kick over. With the sensor un-plugged the engine will turn but not ever start. I plugged the sensor back in and the engine starts in the test mode. Back out and try to start...

I have not been able to locate a Workshop Manual for the M62. Any suggestions on where to look?

M62 TLB (550ish hours) will not start (will not turn over) after I looked at all of the intellipanel "service Inspect" functions "A", "B", etc... The order of events are as follows: 1) I got a P0336 error. I changed the engine sensor 1J800-59710 as recommended by two different shops. This...